NPSTN > Frequently Asked Questions
Q: What is the difference between NoveltyPSTN (NPSTN) and C*NET (Collectors Network) ? -- A: C*NET and NPSTN are both very good telephone networks. NPSTN & C*NET are both peer-to-peer telephone networks with a central route-table, NPSTN is more secure because our Route Table lookup requests are encrypted and are not sent in plain text like C*NET, NPSTN is a lot more flexible than C*Net because we custom designed and built our Route Table Software. NPSTN can also fail-over to MULTIPLE Route Table switches around the world for amazing reliability! Lastly, NPSTN at its current state is just almost as large as the C*NET U.S. Listings. We have almost 20 members in 5 countries (Not everyone has their Listings in the directory) Lastly, NPSTN has code in its route-table to interop with C*NET U.S. (1DD) Q: Why are there no Country Codes on NPSTN? -- A: We had a discussion a while back and ultimelty decided to follow U.S. 7-Digit-Dialing *punctuation needed this is because most of the members that are a part of NPSTN are in the U.S. and we feel that no matter where people are on the network we can create a better experience by making everything seem more 'local' to the subscriber. Q: What if I am already on C*Net but want to be a part of NPSTN? A: If you are in CNET U.S. Send us your office code, IAX Username, Email, Full Name to [email protected] and we will put you in the route table, You will not have to modify your existing configuration, But if you want to dial onto NPSTN please copy our example code Here. Q: What if I don't have a 'system' to hook up. How can I attach a regular phone to the network? -- A: You can use the main NPSTN tandem (Office Code 327) to host you, or one of our members could volunteer to do the same. Just Email [email protected] or pose the question to the mailing list after you join it. You will need either: (1) a telephone and analog terminal adapter (ATA) Use the Grandstream HT502 or GXW-4008 for Rotary Support, or (2) a Digital IP phone, or (3) a softphone (Software application based Phone) installed on your Personal Computer or Other Device. Q: My step switch has three-digit dialing so I don't know if that's something that can be configured around in the software or if I have to put in digit-absorbing selectors in my switch. -- A: Asterisk can dial into your Switch with any number of digits you like. For example, if one of your NPSTN-assigned phone numbers is 971-4776, you could configure Asterisk to send just "776" to your step switch. Q: Does asterisk support rotary pulse dialing, or does one need tone->pulse converters on his switch? -- A: Yes, Asterisk supports pulse dialing, It's just the hardware you connect to Asterisk that may not support pulse dialing. Zaptel/Dahdi hardware made by Digium can understand pulse dialing. There is a parameter that needs to be set in /etc/zapata.conf: pulsedial=yes If you just want to connect one or two Telephones to Asterisk and don't have a Step or other electromechanical switch then Grandstream HT502 ATA's will work for you, If you need 8 Telephones then the Grandstream GXW-4008 Will work for you. Most Grandstream ATAs understand pulse dialing as of the time of writing Jan 26, 2019. Q: What do you recommend as a minimum (and cheapest) hardware complement for the Asterisk interface to an Electromechanical Switch? -- A: What I have learned so far is this: For the lowest possibility of hassles, get a new board from Digium. They'll stand by you every step of the way, from talking with you to determine what board you will need, to helping you get it installed properly to standing behind it if something goes wrong. Another brand new FXO and FXS cards are manufactured offshore, but sold by US companies. The one with which I've had dealings is Voicetronix. My only issue in dealing with them is that they are located in Australia, so it's a bit difficult to synchronize their business hours with your free time. They definitely know their stuff, though, and were able to work with me to get some nasty echo problems cleared up. DiaLogic has a whole slew of products that will work with Asterisk, but I've not heard how well they work There are clones of Digium's Zaptel cards that are made in Asia. They are cheap and generally work well. But they have no tech support. You buy these if you're skilled at installing the Digium cards. And there are others, all listed at http://www.asterisk.org/index.php?menu=hardware. Lastly, there is the used market. I sold my Voicetronix card on eBay, and the guy who bought it from me was quite happy with the card, as well as the price he paid. If you go that route, the usual eBay precautions apply: Deal with only those people who have perfect or almost perfect records as regards positive feedback. If you want additional peace of mind, buy shipping insurance. Do a search on TDM400P or X100P, depending on whether you want the FXO or FXS card. (Again, consult the website in the previous paragraph to see which is which). Q: I have several computers and have been considering loading Linux on one of them, and I have a broadband connection. What else would I need to participate in NPSTN, and what would I gain? -- A: You would need an Ethernet port on that computer, either on the motherboard or as a card. And you would need a card in your PC that would serve as the physical interface between your computer and your Telephones/Switches. Q: Should I use SIP or IAX to connect to the NPSTN? -- A: Either should work well. IAX is the simplest to set up, especially if your computer is NATted, i.e., using private IP space.Credit to the Collectors Network for supplying a basis for this FAQ documentation.